|
|
Perforated Diffuser |
|
|
Model PD diffusers are designed
for used in commercial application and are particularly suited with high
air change rated and high cooling differentials. The diffusers are suitable for installation in various modeled suspended ceiling system which includes square and rectangular type such as 300, 600 & 1200mm. FEATURES & BENEFITS The diffusers are manufactured from perforated aluminium or sheet steel. Various model available for choosing to match architectural requirements: |
||
|
AIR SUPPLY SERIES |
||
| PD-SF-FLUSH FACE |
 |
|
| PD-SD-DROP FACE |
 |
|
|
AIR RETURN SERIES |
||
|
PD-RF FLUSH FACE |
 |
|
| PD-RD DROP FACE |
 |
|
| Visually compatible, return
model have the same face and border construction as the supply model, for
harmonious appearance in the room. Discharge pattern is easily adjusted. Easy to install and maintenance. FINISHED Extruded Aluminium Construction Natural anodized or baked enamel in white as a standard, special anodize or baked enamel in various colour are also available on request. Steel Construction White baked enamel as a standard finish, special colour finishes are also available to match architectural requirement. ACCESSORIES O.B.D. Opposite blade damper for SQUARE & RECTANGULAR. Dampers manufactured from sheet steel and fixed behind the PD as a volume controller, Standard finish is black baked enamel. The damper blades move simultaneously in opposite direction. Allow for smooth volume control from fully open to fully close. Smooth operation by turning a single adjustment screw. Butterfly Damper for round neck. The damper manufactured from sheet steel, standard finish is black baked enamel. Sliding blade damper for round necks. The dampers manufactured from sheet steel standard finish is baked enamel in black matt colour. |
||
 |
||
 |
||
|
|
||
